Introduction

Inertox^®Moisten perfluorinated lubricating grease base oil is a high viscosity index (PFPE), the thickener is polytetrafluoroethylene (PTFE), using a new process flow, adding durable special additives; in high and low temperature scenarios, stable and reliable; Inertox^®Moisten uses high molecular weight PFPE, which has a longer service life than general fluorocarbon products, and leaves almost no residue after long-term use. For product recommendations for actual use sites, please consult the supplier.

Features

• Good high and low temperature performance, using high thickening rate PTFE, high oil content, longer lubrication cycle.
• Low viscosity reduces low-temperature torque loss, low friction coefficient, impact load resistance; not afraid of rubber or metal sliding friction.
• Excellent chemical and solvent resistance, unaffected by sulfuric acid, nitrous acid, hydrochloric acid, strong oxidants, water and water vapor, etc.; can be used in equipment operating in various environments, free from rust.
• Excellent mechanical and colloidal stability, excellent adhesion, and not easy to lose during long-term use.
• Compatible with most sealing materials, plastics and coatings.
• Extremely stable chemical structure, oxidation resistance, suitable for long-term (lifetime) lubrication.
• Excellent chemical and thermodynamic stability.
• Low starting torque, low friction value.
• The product can be dissolved in trichlorotrifluoroethane and white mineral oil.

Applications

• Can be used in high-temperature bearings in the food industry and complies with NSF(H2) standards.
• Automotive industry throttle position sensors; ABS braking systems, idle air actuators; fuel sensors, connectors, sunroof rails, etc.
• Small and micro electric motors, control switches, and solenoid valves.
• High-temperature, high-speed motor bearing rolling friction, plastic gear sliding friction.
• Bearings operating in oil and gas environments and high-temperature environments.
• In the electronics industry, lubrication of seals and friction points inside high-temperature vacuum chambers.
• High-temperature, high-speed bearings in industries such as wood flooring (laminate materials), steel, cement, glass, and papermaking.

Note: This data is measured data, the actual product may have slight errors. INLUBOL^®Yingrunbao^®and mainland manufacturers reserve the right to further improve technology without further notice. There may be data errors during production, please understand and accept manufacturing tolerances.

Note on use: This product is not recommended to be mixed with different types of lubricating products. If it must be mixed, please consult the sales representative for precautions.

Shelf life: >4 years (store in original packaging away from light)